Faculty

Profile

RAMESHA K

BE, MTech
ASSISTANT PROFESSOR

MECHANICAL AND AUTOMOBILE ENGINEERING
SCHOOL OF ENGINEERING AND TECHNOLOGY
BANGALORE KENGERI CAMPUS
 Print Profile

Name Programme Year of Passing
PG MTech 2011
Degree BE 2009
PhD Pursuing (2015) 0
Sl.No. Title Name of Periodical Periodicity Date
Sl.No. Title Name of Journal Date of Publication Volume No/Issue No/Page No
1 Influence of heat treatment and reinforcements on tensile characteristics of aluminium aa 5083/silicon carbide/fly ash composites materials 13-Sep-2021 14 / 18 / 1-27

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) RAMESHA K,SANTHOSH NAGARAJA ,KHALID ANSARI,MOHAMED SAHEER KURUNIYAN,ASIF AFZAL,ABDUL RAZAK KALADGI,NAVID ASLFATTAHI,C. AHAMED SALEEL,ASHWIN C. GOWDA,PRAVEENA BINDIGANAVILE ANAND
Title of Article Influence of heat treatment and reinforcements on tensile characteristics of aluminium aa 5083/silicon carbide/fly ash composites
Name of Journal materials
Volume No 14
Issue No 18
Page No 1-27
URL https://www.mdpi.com/1996-1944/14/18/5261
Indexing Agency Scopus
Date of Publication 13-Sep-2021
2 Design and optimization of the process parameters for friction stir welding of dissimilar aluminium alloys Engineering and Applied Science Research 23-Sep-2020 48 / 3 / 257-267

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) JANGAM SASIDHAR,RAMESHA K
Title of Article Design and optimization of the process parameters for friction stir welding of dissimilar aluminium alloys
Name of Journal Engineering and Applied Science Research
Volume No 48
Issue No 3
Page No 257-267
URL https://ph01.tci-thaijo.org/index.php/easr/article/view/241021
Indexing Agency Scopus
Date of Publication 23-Sep-2020
3 Geo-Spatial Crime Analysis Using Newsfeed Data in Indian Context International Journal of Web-Based Learning and Teaching Technologies(IJWLTT) 01-Aug-2019 14 / 4 / 49-64

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) BOPPURU RUDRA PRATHAP,RAMESHA K
Title of Article Geo-Spatial Crime Analysis Using Newsfeed Data in Indian Context
Name of Journal International Journal of Web-Based Learning and Teaching Technologies(IJWLTT)
Volume No 14
Issue No 4
Page No 49-64
URL https://www.igi-global.com/article/geo-spatial-crime-analysis-using-newsfeed-data-in-indian-context/234371
Indexing Agency Scopus
Date of Publication 01-Aug-2019
4 Effect of the Process Parameters on Machining of GFRP Composites for Different Conditions of Abrasive Water Suspension Jet Machining Arabian Journal Of Science And Engineering 28-Jun-2019 9 / 94 / 1-11

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) SANTHOSH N,RAMESHA K,KIRAN K,MANJUNATH N
Title of Article Effect of the Process Parameters on Machining of GFRP Composites for Different Conditions of Abrasive Water Suspension Jet Machining
Name of Journal Arabian Journal Of Science And Engineering
Volume No 9
Issue No 94
Page No 1-11
URL https://link.springer.com/article/10.1007/s13369-019-03973-w
Indexing Agency Scopus
Date of Publication 28-Jun-2019
5 Vibration Characterization of Reinforced Aluminium Composite Plates Journal of Engineering Science and Technology 01-Feb-2019 2 / 1 / 71-88

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) SANTHOSH N,MANJUNATH N,RAMESHA K
Title of Article Vibration Characterization of Reinforced Aluminium Composite Plates
Name of Journal Journal of Engineering Science and Technology
Volume No 2
Issue No 1
Page No 71-88
URL https://www.researchgate.net/publication/330926457_Vibration_Characterization_of_Reinforced_Aluminium_Composite_Plates
Indexing Agency Scopus
Date of Publication 01-Feb-2019
6 Vibration Characterization of Reinforced Aluminium Composite Plates Journal Of Engineering Science And Technology 01-Feb-2019 2 / 1 / 71-88

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) SANTHOSH N,MANJUNATH N,RAMESHA K
Title of Article Vibration Characterization of Reinforced Aluminium Composite Plates
Name of Journal Journal Of Engineering Science And Technology
Volume No 2
Issue No 1
Page No 71-88
URL https://www.researchgate.net/publication/330926457_Vibration_Characterization_of_Reinforced_Aluminium_Composite_Plates
Indexing Agency Scopus
Date of Publication 01-Feb-2019
7 Vibration Characterization of Reinforced Aluminium Composite Plates Journal of Engineering Science and Technology 16-Jan-2019 02 / 1 / 71-88

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) MANJUNATH N,RAMESHA K
Title of Article Vibration Characterization of Reinforced Aluminium Composite Plates
Name of Journal Journal of Engineering Science and Technology
Volume No 02
Issue No 1
Page No 71-88
URL https://www.researchgate.net/publication/330926457_Vibration_Characterization_of_Reinforced_Aluminium_Composite_Plates
Indexing Agency Scopus
Date of Publication 16-Jan-2019
Sl.No. Title URL Subject Month Year
Sl.No. Type of Book Title Title of Book ISBN Month Year
Sl.No. Type of Book Title of Chapter/Article ISBN Month Year
1 Text book Comparison of Various Types of Lubrication During Hard Turning of H13 Tool Steel by Analysing Flank Wear Using ANOVA 978-981-32-9931-3 Dec 2019

Additional information

Type of Book Text book
Type of Work Chapter
Sole Authored/Co Authored Co-Authored
Author Name (s) RAMESHA K,ANIL RAJ
Title of Book Emerging Trends in Mechanical Engineering
Title of Book/Chapter/Article/Case Study) Comparison of Various Types of Lubrication During Hard Turning of H13 Tool Steel by Analysing Flank Wear Using ANOVA
Month/Year Dec/2019
ISBN 978-981-32-9931-3
Pages 489 - 497
Publishing Company/Institution Springer, Singapore
Indexing Agency Scopus
Level International publisher
Sl.No. Type of Book Title Title of Case Study ISBN Month Year
Sl.No. Title Abstract Objectives Type Sponsors
Sl.No. Title Place of Publication ISBN No. Month Year
Sl.No. Type of Program Role Name of Program Title of Paper Date Organising Institution Level
1 Conference Presenter 2nd International Conference on Advanced Research in Mechanical Engineering-2021? (2ndICARME-21) Design and optimization of the process parameters for fusion deposition modelling by experimental and finite element approach 29/04/2021 Department of Mechanical Engineering, in association with IWS, IIC and IQAC-MVJ College of Engineering, Bengaluru, International
2 Conference Presenter 2nd International Conference on Advanced Research in Mechanical Engineering-2021? (2ndICARME-21) Influence of heat treatment on tensile and hardness characteristics of friction stir weld joint of dissimilar aluminum alloys 29/04/2021 Department of Mechanical Engineering, in Association with IWS, IIC and IQAC-MVJ College of Engineering, Bengaluru International
3 Conference Presenter ?2nd International Conference on Advanced Research in Mechanical Engineering-2021? (2ndICARME-21) Friction Stir Welding of dissimilar aluminum alloys for vehicle structures and aerospace applications 29/04/2021 Department of Mechanical Engineering, in Association with IWS, IIC and IQAC-MVJ College of Engineering, Bengaluru International
4 Conference Presenter International Conference on Innovations in Mechanical Sciences (ICIMS 21) Sustainable processing of dissimilar aluminium alloy joints by friction stir welding 19/02/2021 Adi Shankara Institute of Engineering and Technology, Kalady International
5 Conference Presenter International Conference on Innovations in Mechanical Sciences (ICIMS 21) Sustainable processing of dissimilar aluminium alloy joints by friction stir welding 19/02/2021 Department of Mechanical Engineering Adi Shankara Institute of Engineering and Technology, Kalady Ernakulam district, Kerala, India International
6 Conference Presenter 2nd International (Virtual) Conference on Recent Trends in Technology,Engineering and Applied Science [ICRTTEAS] Corrosion Characterization of Friction Stir Weld Joints of Dissimilar Aluminium Alloys 24/07/2020 Dr.T.Thimmaiah Institute of Technology, KGF. International
7 Conference Presenter International Conference on Future Engineering (ICFE-2020) Friction Stir Welding of Dissimilar Aluminium Alloys and its Characterization. 26/06/2020 mazedan international research academy, Dr. Rammanoha Lohia Avadh University, Ayodhya and Dr. AIT, Bengaluru International
8 Conference Presenter International Conference on Innovations and Challenges in Science and Technology Computational Fluid Dynamics Analysis of Flow Over Symmetric Aerofoil 19/12/2019 Don Bosco Institute of Technology, Bangalore International
9 Conference Presenter Innovations and Challenges in Science and Technology Modal Analysis of Flexible Fibers Using 3D Digital Image Correlation-A Novel pproach 19/12/2019 Don Bosco Institute of Technology, Bangalore International
10 Conference Presenter International Conference on Emerging Research in Civil, Aeronautical and Mechanical Engineering optimization of friction stir welding parameters using taguchi method for aerospace applications 25/07/2019 Nitte Meenakshi Institute of Technology, Bengaluru. International
11 Conference Presenter International Conference on Advancements in Mechanical Engineering Optimization of Friction Stir Welding parameters using Taguchi method 10/04/2019 Jyothi Engineering College, Thrissur, International
12 Conference Presenter ACeND 2018 Friction stir welding of dissimilar metal joint of 3103 H18 Aluminium alloy and AZ63T6 Magnesium alloy 20/09/2018 Christ University International
13 Conference Participant National Level Conference On Innovative Trends In Mechanical Engineering 27/02/2018 Christ University National
14 Conference Co-presenter National Conference On Mechanical Engineering and Emerging Technologies 23/02/2018 Christ University National
Sl.No. Title of the Program Name of the Program Date Name of the Institution
Sl.No. Title Genre Producer Copyrights
Sl.No. Title Guide Name Institution Month Year
Sl.No. Title Name of Student Institution Month Year
Sl.No. Title of Invention Inventor(s) Filing Date
Sl.No. Name of the Research Project Investigator(s) Sponsors Internal/External
Sl.No. Name of the Conference/Seminar Name of Organiser Level Date
Sl.No. Name of the Workshop/FDP/Training programme Name of Oraganiser Level Date
1 Short Term Training Program (STTP) on MATLAB Department of Mechanical Engineering, in association with ISTE, IIC and IQAC-MVJ College of Engineering National 14/09/2021
2 Advances in Materials &Manufacturing Department of mechanical engineering National 12/07/2021
3 Hybrid Teaching CHRIST (Deemed to be University) 02/03/2021
4 APPLICATIONS OF MATLAB FOR MECHANICAL ENGINEERS Department of mechanical engineering, SJCE National 01/03/2021
5 Advanced Manufacturing Techniques for Medical and Precision Engineering Departmentof Mechanical Engineering in association with IIC and IQAC National 04/01/2021
6 Mechatronics introduction, Modelling & Simulation and Research Chennai Institute of Technology National 06/07/2020
7 Advanced Manufacturing Process Analysis International 19/04/2020
8 Learn to Teach Online UNSW Sydney (The University of New South Wales) International 09/04/2020
9 Digital Manufacturing & Design University at Buffalo and The State University of New York International 03/04/2020
10 FDP on Advanced Materials and Applications AICTE National 30/12/2019
11 MOOC Global Health Training Center International 25/11/2019
12 Fundamentals of Manufacturing Process IIT, Roorkee National 08/07/2019
13 workshop on Research and modern tools usage CHRIST UNIVERSITY Institutional 30/05/2019
14 Joining Techniques for Metals IIT, Roorkee National 22/04/2019
15 one day workshop on Outcome Based Education ( OBE) Faculty of Engineering, CHRIST (Deemed to be University) Institutional 03/12/2018
16 Skill Development on Industrial Automation Phase 2 Centre for Industrial Automation Institutional 19/11/2018
17 Train the Trainers - Electro Pneumatics & Electro Hydraulics Centre for Industrial Automation Institutional 06/09/2018
18 Faculty Improvement Program on Intellectual Property Rights Department of Mechanical and Automobile Engineering, CHRIST (deemed to be University) Institutional 06/08/2018
19 FRONTIER AREAS IN THE SUBJECT AND CURRICULUM UPDATION Department of Mechanical and Automobile Engineering, CHRIST (deemed to be University) Institutional 21/05/2018
20 Strategic Plan Faculty of Engineering, CHRIST (Deemed to be University) Institutional 11/04/2018
21 Teaching learning and Evaluation CU Academic Staff College 24/05/2017
22 Research- Trends, Tools and Processe Department of Mechanical Engineering, Christ University 24/09/2016
23 Research Enablers And Its Thrust Areas Department of Mechanical engineering, Christ University 23/05/2016
24 MATLAB Tools for Analysis and Computations School of Mechanical Engineering Regional 04/01/2016
Sl.No. Name of the Awards/Achievements/Others Description Organisation Month/ Year
1 NPTEL CERTIFICATION-Metal Cutting and Machine Tools NPTEL is an acronym for National Programme on Technology Enhanced Learning which is an initiative by seven Indian Institutes of Technology (IIT Bombay, Delhi, Guwahati, Kanpur, Kharagpur, Madras and Roorkee) and Indian Institute of Science (IISc) for creating course contents in engineering and science. NPTEL as a project originated from many deliberations between IITs, Indian Institutes of Management (IIMs) and Carnegie Mellon University (CMU) during the years 1999-2003. A proposal was jointly IIT Kharagpur, MHRD 05 June 2018
2 Professional Membership : Senior Member ISME Indian Society of Mechanical Engineers (Senior Member SMISME) Indian Society of Mechanical Engineers 14 February 2019
3 NPTEL Certification - Joining Techniques for Metals NPTEL is an acronym for National Programme on Technology Enhanced Learning which is an initiative by seven Indian Institutes of Technology (IIT Bombay, Delhi, Guwahati, Kanpur, Kharagpur, Madras and Roorkee) and Indian Institute of Science (IISc) for creating course contents in engineering and science. NPTEL as a project originated from many deliberations between IITs, Indian Institutes of Management (IIMs) and Carnegie Mellon University (CMU) during the years 1999-2003. A proposal was jointly IIT, Roorkee, MHRD 16 May 2019
4 NPTEL Certification - Fundamentals of Manufacturing Process NPTEL is an acronym for National Programme on Technology Enhanced Learning which is an initiative by seven Indian Institutes of Technology (IIT Bombay, Delhi, Guwahati, Kanpur, Kharagpur, Madras and Roorkee) and Indian Institute of Science (IISc) for creating course contents in engineering and science. NPTEL as a project originated from many deliberations between IITs, Indian Institutes of Management (IIMs) and Carnegie Mellon University (CMU) during the years 1999-2003. A proposal was jointly IIT, Roorkee, MHRD 25 November 2019
Sl.No. Faculties Theme of Consultancy Type
Sl.No. Applicants Title Date Published

CHRIST

(Deemed to be University)

Dharmaram College Post, Hosur Road, Bengaluru - 560029,
Karnataka, India

Tel: +91 804012 9100 / 9600

Fax: 40129000

Email: mail@christuniversity.in

Web: http://www. christuniversity.in

Vision

EXCELLENCE AND SERVICE

Mission

CHRIST (Deemed to be University) is a nurturing ground for an individual's holistic development to make effective contribution to the society in a dynamic environment.

Copyright © CHRIST (Deemed to be University) 2020